ADXL367 Datasheet | Analog Devices

Data Sheet ADXL367 Micropower, 3-Axis, ±2 g/±4 g/±8 g Digital Output MEMS Accelerometer Features - Supply voltage range - Single-cell battery operation: 1.1 V to 3.6 V - Internal power supply regulation for high PSRR - Ultralow power - 0.89 µA at 100 Hz ODR, 2.0 V supply - 180 n A motion activated wake-up mode - 40 n A standby current - High resolution: 0.25 mg/LSB - Built-in Features for system level power savings - Single-tap and double-tap detection with only 35 n A of added current - Adjustable threshold sleep and wake-up modes for motion activation - Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off pletely - Deep 512 sample embedded FIFO minimizes host processor load - Awake state output enables implementation of motion activated switch - Low noise to 170 µg/√Hz - Acceleration sample synchronization via external trigger - On-chip temperature sensor - Internal two-pole antialias filter - SPI (4-wire) and I2C digital interfaces - Small and thin 2.2 mm × 2.3 mm × 0.87 mm package APPLICATIONS - 24/7 sensing - Hearing aids - Vital signs monitoring devices - Motion-enabled power save switches - Motion-enabled metering devices - Smart watch with single-cell...